【AKI 3.7.3】Borkel’s Realistic Night Vision Goggles (NVGs and T-7)

AUTHORIZED BY ME MYSELF, I'M THE AUTHOR

Now with new realistic NVG
masks. I looked at real life NVGs and I tried to imitate them ingame.
Increased the noise values and corrected colors. White phosphorous
included.

NOW WITH NEW MORE REALISTIC MASKS! AND THE T-7!

Also please check the new Amand's Graphics settings, NVG Original Color setting must be turned off.

(Includes
a new optional mask for the GPNVG-18. The masks are also customizable,
place any PNG you want inside of PNGtextures, make sure the name
coincides with an NVG mask name)

I corrected noise values and color of all night vision goggles to be closer to real life. As with the original SBNV mod, you can mount the N-15 on any helmet. The T-7 now is pixelated and capped to 60Hz. I made this mod while using Amands's Graphics, so in order to achieve my same results you will have to use Amands's Graphics
too. Although it's still usable without the graphics mod, you'll still
get the color correction, but will miss the DoF and noise. I've also
tried to take into account NVG generations, so older NVGs will not
amplify as much light as the newer ones.

If you use Amand's Graphics (you should), there are some options in the F12 menu that you must tweak if you want to achieve more realism:

WeaponDepthOfField
will defocus your gun and everything that is very close to the goggles
when they are activated, like in real life.

NVG
Noise Intensity should be cranked to the maximum of 2.0. Noise is
mainly visible when there's no ambient light, but if it bothers you too
much you can lower the intensity. Also, in Amand's Graphics noise is
only applied after turning ON the NVGs, so if you load into a raid with
the NVGs turned ON already, you must turn them OFF and ON again for the
noise to apply.

NVG
ORIGINAL COLOR MUST BE TURNED OFF. This setting was applying different
color filters to the NVGs depending on the map. With this setting turned
off, the NVGs' color will be consistent across all maps.
NVG Moon LightIntensity should be left at 1.0 unless you find the moon light to be too strong, then reduce it.

Here are the visuals i achieve with those settings, if you want to see the noise on these images you'll have to zoom in:

-GPNVG-18
now with white phosphorous. Mask size is for this one is 0.96, you may
need to adjust it if you use ultra-wide resolution (or ask me to make
another mask).

-AN/PVS-14 now with white phosphorous. If you don't like the size of the mask, it can be edited in the config.

-N-15

-PNV-10T. If you don't like the size of the mask, it can be edited in the config.

-T-7 (now with pixelation and 60Hz, you have to zoom in to notice it, or try it ingame)

Installation: drop inside of your SPTarkov folder.

Download

I tried to make a Baidu Cloud account to upload the mod but it doesn't accept Europe's phone numbers. For now, it seems like mediafire still works in China so I'm uploading the files there, if it doesn't let you access it from within the firewall please let me know. Also I have no interest on gaining coins, so if it's not against ODDBA's rules I'm also sharing the download link in the visible section:

This mod would not have been possible without the previous work of Snofielf's mod.